Print
Overview
- Make
- Other
- Model
- HDD Cutter Suction Dredger 200 (8 inch) CSD 200
- Vat Reclaimable
- Yes
- First Registration Year
- 2019
- CE Marking
- Yes
- Condition
- New
- Construction Year
- 2019
- Hours Run
- 10 h
- Steering Wheel Side
- Left hand
- Tradus ID
- 7226282
Technical specifications
- Net Weight
- 33,000 kg
Engine and Transmission
- Max power
- 315 hp
Tradus valuation for Other HDD Cutter Suction Dredger 200 (8 inch) CSD 200
Description
Available in:
Original language
|
Deutsch
|
Nederlands
|
Français
|
Other languages
Deutsch
Nederlands
Français
Colour: White
Engine number: JSC21313
2 units New Cutter Suction Dredger 200,
- Mixture capacity 1.250m3/h,
- Maximum dredging depth 9 m,
- Caterpillar C9 engine,
YOM: 2016
The dredger is equipped with:
- velocity meter,
- vacuum
- discharge pressure sensor,
- Airco,
- navigation lights
- dGPS system with depth sensor.
TECHNICAL SPECIFICATIONS CSD200
Cutter suction dredger 200
One containerized cutter suction dredger CSD 200, total installed power 232 kW, dismountable, suitable for road transport, in special execution as per enclosed Technical Specification with the following main characteristics:
- Length overall, ladder up 22 m
- Hull length incl. side pontoons 15 m
- Width overall 4,8 m
- Average draft with full bunkers 1 m
- Height 4 m
Main pontoon:
- Measurements 8 x 2.4 x 2.2/1.5 m
Built in
- Caterpillar C9 main diesel engine 232 kW
- Dredge pump type HDD 200 (2020)
- Mixture capacity 1.200 m3/h @ 7 bar
- Spuds, 2x, each diam 273 mm
- Operating cabin 1.8 x 2 x 2.1 m
Side pontoon
- Measurements 11,8 x 1,5 x 1.2 m
- Fuel tanks in total 7,00 m3
- Deck crane 1 ton
Ladder:
- Cutter Crown 650 mm
Power (hydraulic) 25 kW
Rotation 0-35 rpm
- Length 13,5 m
- Suction diameter 223 mm
- Discharge diameter 200 mm
- Ladder hoisting ram 10 tons
- Swing winches, each 2 tons
- Spud hoisting ram 10 tons
Maximum dredging depth 9 m
Instrumentation:
The dredger is equipped with a velocity meter, vacuum and discharge pressure sensor, Airco, navigation lights and dGPS system with depth sensor
Documentation:
- Installation manual
- Part book
Dredgers are tested and are ready for work.
Engine number: JSC21313
2 units New Cutter Suction Dredger 200,
- Mixture capacity 1.250m3/h,
- Maximum dredging depth 9 m,
- Caterpillar C9 engine,
YOM: 2016
The dredger is equipped with:
- velocity meter,
- vacuum
- discharge pressure sensor,
- Airco,
- navigation lights
- dGPS system with depth sensor.
TECHNICAL SPECIFICATIONS CSD200
Cutter suction dredger 200
One containerized cutter suction dredger CSD 200, total installed power 232 kW, dismountable, suitable for road transport, in special execution as per enclosed Technical Specification with the following main characteristics:
- Length overall, ladder up 22 m
- Hull length incl. side pontoons 15 m
- Width overall 4,8 m
- Average draft with full bunkers 1 m
- Height 4 m
Main pontoon:
- Measurements 8 x 2.4 x 2.2/1.5 m
Built in
- Caterpillar C9 main diesel engine 232 kW
- Dredge pump type HDD 200 (2020)
- Mixture capacity 1.200 m3/h @ 7 bar
- Spuds, 2x, each diam 273 mm
- Operating cabin 1.8 x 2 x 2.1 m
Side pontoon
- Measurements 11,8 x 1,5 x 1.2 m
- Fuel tanks in total 7,00 m3
- Deck crane 1 ton
Ladder:
- Cutter Crown 650 mm
Power (hydraulic) 25 kW
Rotation 0-35 rpm
- Length 13,5 m
- Suction diameter 223 mm
- Discharge diameter 200 mm
- Ladder hoisting ram 10 tons
- Swing winches, each 2 tons
- Spud hoisting ram 10 tons
Maximum dredging depth 9 m
Instrumentation:
The dredger is equipped with a velocity meter, vacuum and discharge pressure sensor, Airco, navigation lights and dGPS system with depth sensor
Documentation:
- Installation manual
- Part book
Dredgers are tested and are ready for work.
Farbe: Weiß
Engine number: JSC21313
2 units New Cutter Suction Dredger 200,
- Mixture capacity 1.250m3/h,
- Maximum dredging depth 9 m,
- Caterpillar C9 engine,
YOM: 2016
The dredger is equipped with:
- velocity meter,
- vacuum
- discharge pressure sensor,
- Airco,
- navigation lights
- dGPS system with depth sensor.
TECHNICAL SPECIFICATIONS CSD200
Cutter suction dredger 200
One containerized cutter suction dredger CSD 200, total installed power 232 kW, dismountable, suitable for road transport, in special execution as per enclosed Technical Specification with the following main characteristics:
- Length overall, ladder up 22 m
- Hull length incl. side pontoons 15 m
- Width overall 4,8 m
- Average draft with full bunkers 1 m
- Height 4 m
Main pontoon:
- Measurements 8 x 2.4 x 2.2/1.5 m
Built in
- Caterpillar C9 main diesel engine 232 kW
- Dredge pump type HDD 200 (2020)
- Mixture capacity 1.200 m3/h @ 7 bar
- Spuds, 2x, each diam 273 mm
- Operating cabin 1.8 x 2 x 2.1 m
Side pontoon
- Measurements 11,8 x 1,5 x 1.2 m
- Fuel tanks in total 7,00 m3
- Deck crane 1 ton
Ladder:
- Cutter Crown 650 mm
Power (hydraulic) 25 kW
Rotation 0-35 rpm
- Length 13,5 m
- Suction diameter 223 mm
- Discharge diameter 200 mm
- Ladder hoisting ram 10 tons
- Swing winches, each 2 tons
- Spud hoisting ram 10 tons
Maximum dredging depth 9 m
Instrumentation:
The dredger is equipped with a velocity meter, vacuum and discharge pressure sensor, Airco, navigation lights and dGPS system with depth sensor
Documentation:
- Installation manual
- Part book
Dredgers are tested and are ready for work.
Engine number: JSC21313
2 units New Cutter Suction Dredger 200,
- Mixture capacity 1.250m3/h,
- Maximum dredging depth 9 m,
- Caterpillar C9 engine,
YOM: 2016
The dredger is equipped with:
- velocity meter,
- vacuum
- discharge pressure sensor,
- Airco,
- navigation lights
- dGPS system with depth sensor.
TECHNICAL SPECIFICATIONS CSD200
Cutter suction dredger 200
One containerized cutter suction dredger CSD 200, total installed power 232 kW, dismountable, suitable for road transport, in special execution as per enclosed Technical Specification with the following main characteristics:
- Length overall, ladder up 22 m
- Hull length incl. side pontoons 15 m
- Width overall 4,8 m
- Average draft with full bunkers 1 m
- Height 4 m
Main pontoon:
- Measurements 8 x 2.4 x 2.2/1.5 m
Built in
- Caterpillar C9 main diesel engine 232 kW
- Dredge pump type HDD 200 (2020)
- Mixture capacity 1.200 m3/h @ 7 bar
- Spuds, 2x, each diam 273 mm
- Operating cabin 1.8 x 2 x 2.1 m
Side pontoon
- Measurements 11,8 x 1,5 x 1.2 m
- Fuel tanks in total 7,00 m3
- Deck crane 1 ton
Ladder:
- Cutter Crown 650 mm
Power (hydraulic) 25 kW
Rotation 0-35 rpm
- Length 13,5 m
- Suction diameter 223 mm
- Discharge diameter 200 mm
- Ladder hoisting ram 10 tons
- Swing winches, each 2 tons
- Spud hoisting ram 10 tons
Maximum dredging depth 9 m
Instrumentation:
The dredger is equipped with a velocity meter, vacuum and discharge pressure sensor, Airco, navigation lights and dGPS system with depth sensor
Documentation:
- Installation manual
- Part book
Dredgers are tested and are ready for work.
Kleur: White
Engine number: JSC21313
2 units New Cutter Suction Dredger 200,
- Mixture capacity 1.250m3/h,
- Maximum dredging depth 9 m,
- Caterpillar C9 engine,
YOM: 2016
The dredger is equipped with:
- velocity meter,
- vacuum
- discharge pressure sensor,
- Airco,
- navigation lights
- dGPS system with depth sensor.
TECHNICAL SPECIFICATIONS CSD200
Cutter suction dredger 200
One containerized cutter suction dredger CSD 200, total installed power 232 kW, dismountable, suitable for road transport, in special execution as per enclosed Technical Specification with the following main characteristics:
- Length overall, ladder up 22 m
- Hull length incl. side pontoons 15 m
- Width overall 4,8 m
- Average draft with full bunkers 1 m
- Height 4 m
Main pontoon:
- Measurements 8 x 2.4 x 2.2/1.5 m
Built in
- Caterpillar C9 main diesel engine 232 kW
- Dredge pump type HDD 200 (2020)
- Mixture capacity 1.200 m3/h @ 7 bar
- Spuds, 2x, each diam 273 mm
- Operating cabin 1.8 x 2 x 2.1 m
Side pontoon
- Measurements 11,8 x 1,5 x 1.2 m
- Fuel tanks in total 7,00 m3
- Deck crane 1 ton
Ladder:
- Cutter Crown 650 mm
Power (hydraulic) 25 kW
Rotation 0-35 rpm
- Length 13,5 m
- Suction diameter 223 mm
- Discharge diameter 200 mm
- Ladder hoisting ram 10 tons
- Swing winches, each 2 tons
- Spud hoisting ram 10 tons
Maximum dredging depth 9 m
Instrumentation:
The dredger is equipped with a velocity meter, vacuum and discharge pressure sensor, Airco, navigation lights and dGPS system with depth sensor
Documentation:
- Installation manual
- Part book
Dredgers are tested and are ready for work.
Engine number: JSC21313
2 units New Cutter Suction Dredger 200,
- Mixture capacity 1.250m3/h,
- Maximum dredging depth 9 m,
- Caterpillar C9 engine,
YOM: 2016
The dredger is equipped with:
- velocity meter,
- vacuum
- discharge pressure sensor,
- Airco,
- navigation lights
- dGPS system with depth sensor.
TECHNICAL SPECIFICATIONS CSD200
Cutter suction dredger 200
One containerized cutter suction dredger CSD 200, total installed power 232 kW, dismountable, suitable for road transport, in special execution as per enclosed Technical Specification with the following main characteristics:
- Length overall, ladder up 22 m
- Hull length incl. side pontoons 15 m
- Width overall 4,8 m
- Average draft with full bunkers 1 m
- Height 4 m
Main pontoon:
- Measurements 8 x 2.4 x 2.2/1.5 m
Built in
- Caterpillar C9 main diesel engine 232 kW
- Dredge pump type HDD 200 (2020)
- Mixture capacity 1.200 m3/h @ 7 bar
- Spuds, 2x, each diam 273 mm
- Operating cabin 1.8 x 2 x 2.1 m
Side pontoon
- Measurements 11,8 x 1,5 x 1.2 m
- Fuel tanks in total 7,00 m3
- Deck crane 1 ton
Ladder:
- Cutter Crown 650 mm
Power (hydraulic) 25 kW
Rotation 0-35 rpm
- Length 13,5 m
- Suction diameter 223 mm
- Discharge diameter 200 mm
- Ladder hoisting ram 10 tons
- Swing winches, each 2 tons
- Spud hoisting ram 10 tons
Maximum dredging depth 9 m
Instrumentation:
The dredger is equipped with a velocity meter, vacuum and discharge pressure sensor, Airco, navigation lights and dGPS system with depth sensor
Documentation:
- Installation manual
- Part book
Dredgers are tested and are ready for work.
Engine number: JSC21313
2 units New Cutter Suction Dredger 200,
- Mixture capacity 1.250m3/h,
- Maximum dredging depth 9 m,
- Caterpillar C9 engine,
YOM: 2016
The dredger is equipped with:
- velocity meter,
- vacuum
- discharge pressure sensor,
- Airco,
- navigation lights
- dGPS system with depth sensor.
TECHNICAL SPECIFICATIONS CSD200
Cutter suction dredger 200
One containerized cutter suction dredger CSD 200, total installed power 232 kW, dismountable, suitable for road transport, in special execution as per enclosed Technical Specification with the following main characteristics:
- Length overall, ladder up 22 m
- Hull length incl. side pontoons 15 m
- Width overall 4,8 m
- Average draft with full bunkers 1 m
- Height 4 m
Main pontoon:
- Measurements 8 x 2.4 x 2.2/1.5 m
Built in
- Caterpillar C9 main diesel engine 232 kW
- Dredge pump type HDD 200 (2020)
- Mixture capacity 1.200 m3/h @ 7 bar
- Spuds, 2x, each diam 273 mm
- Operating cabin 1.8 x 2 x 2.1 m
Side pontoon
- Measurements 11,8 x 1,5 x 1.2 m
- Fuel tanks in total 7,00 m3
- Deck crane 1 ton
Ladder:
- Cutter Crown 650 mm
Power (hydraulic) 25 kW
Rotation 0-35 rpm
- Length 13,5 m
- Suction diameter 223 mm
- Discharge diameter 200 mm
- Ladder hoisting ram 10 tons
- Swing winches, each 2 tons
- Spud hoisting ram 10 tons
Maximum dredging depth 9 m
Instrumentation:
The dredger is equipped with a velocity meter, vacuum and discharge pressure sensor, Airco, navigation lights and dGPS system with depth sensor
Documentation:
- Installation manual
- Part book
Dredgers are tested and are ready for work.
2 units New Cutter Suction Dredger 200,
- Mixture capacity 1.250m3/h,
- Maximum dredging depth 9 m,
- Caterpillar C9 engine,
YOM: 2016
The dredger is equipped with:
- velocity meter,
- vacuum
- discharge pressure sensor,
- Airco,
- navigation lights
- dGPS system with depth sensor.
TECHNICAL SPECIFICATIONS CSD200
Cutter suction dredger 200
One containerized cutter suction dredger CSD 200, total installed power 232 kW, dismountable, suitable for road transport, in special execution as per enclosed Technical Specification with the following main characteristics:
- Length overall, ladder up 22 m
- Hull length incl. side pontoons 15 m
- Width overall 4,8 m
- Average draft with full bunkers 1 m
- Height 4 m
Main pontoon:
- Measurements 8 x 2.4 x 2.2/1.5 m
Built in
- Caterpillar C9 main diesel engine 232 kW
- Dredge pump type HDD 200 (2020)
- Mixture capacity 1.200 m3/h @ 7 bar
- Spuds, 2x, each diam 273 mm
- Operating cabin 1.8 x 2 x 2.1 m
Side pontoon
- Measurements 11,8 x 1,5 x 1.2 m
- Fuel tanks in total 7,00 m3
- Deck crane 1 ton
Ladder:
- Cutter Crown 650 mm
Power (hydraulic) 25 kW
Rotation 0-35 rpm
- Length 13,5 m
- Suction diameter 223 mm
- Discharge diameter 200 mm
- Ladder hoisting ram 10 tons
- Swing winches, each 2 tons
- Spud hoisting ram 10 tons
Maximum dredging depth 9 m
Instrumentation:
The dredger is equipped with a velocity meter, vacuum and discharge pressure sensor, Airco, navigation lights and dGPS system with depth sensor
Documentation:
- Installation manual
- Part book
Dredgers are tested and are ready for work.
Noticed issues with this ad?
Report abuse
Recently viewed
Send a message
Report bad image quality