Ozgul LW3 60 Ton

Lowloader trailers
Status
Net Price
€35 000
€42 350 (Gross)
21% VAT (Reclaimable)
Price rating

Offer details

Year
2020

Contact the seller

+314...CallSend me email alerts for similar offers

BIG Machinery

Velddriel, Netherlands
Registered on Tradus for 2 years View all ads (480)

Overview

Make
Ozgul
Model
LW3 60 Ton
Year
2020
Vat Reclaimable
Yes
First Registration Year
2020
Tradus ID:
5197966

Additional Details

Serial Number / VIN
NP9LW3291PL025006

Tradus valuation for Ozgul LW3 60 Ton

Ozgul LW3 60 Ton - 2020
MARKET AVERAGE
Net Price
€35 000
Tradus Market Value
€33 545
Estimated overpayment
€1 455

This listing is priced high compared to other similar current and previously sold listings in your market. The advertised price of €35 000 is above the Tradus Market Value (a.k.a. TMV) of €33 545. We rate this listing as MARKET AVERAGE with estimated potential overpayment of €1 455.

This listing
€35 000
Very low price
Less than €26 400
Low price
€26 400 - €31 200
Market average
€31 200 - €41 000
High price
€41 000 - €49 100
Very high price
More than €49 100
About TMV

The Tradus Market Value is calculated using advanced Artificial Intelligence taking into consideration several hundred attributes related to this listing. The valuation is based on prices and additional information gathered from millions of current and past listings. While no algorithm is perfect, we constantly improve our system and generally achieve valuation accuracy within an average margin of error of less than€1 000.

Factors included in TMV model

Country
Netherlands
Make
Ozgul
Year
2020

Factors not included in TMV model

Model
Version
Gross weight
Max. payload
Cargo space length
Cargo space width
Length
Axles
Condition

Description

Available in:
Colour: Black

-5. Wheel Height : 1400 mm
-Loading platform height(Unloaded) : 1350 mm
-Loading platform lenght : 10500 mm included beaver tail
-Total length : 14900 mm
-Total width : 3000 mm +2x8 sides extensions flags 300+300
-Goose neck section length : 4400 mm
-King pin distance from front of goose neck :900 mm for 6x4,and 4x2 trucks
-King pin distance between landing leg: 2500 mm
-King pin type : 2 inch +3.5 inch bolting type OMS Brand
-Length of the rear ramp : 2800 mm
-Width of the rear ramp : 900 mm
-Axles group technical capacity : 48000 Kg
-King pin technical capacity : 20000 Kg
-Gross vehicle weight : 68000 Kg
-Empty weight : 12000 Kg
-Permissible Payload : 56000 Kg
-Technically Payload : 60000 Kg
-Chassis Welding : Arc submerged
-Upper structure : Gas welding
Chassis Heavy duty and extra durability designed I beam; Opting for high tensile steel ST 52.3 A welded by automatic Submerged-Arc chassis;Top Flange 20mm,width 150mm; Middle Flange 10mm,Height 500mm, Botton Flange 20mm,width rs are 200 mm and 160 mm height chassis; 300 mm UPE.
Axles ÖZGÜL Turkish Brand 3 x 16 Ton axles with Mecahnical spring suspensions Upper slung type / Drum brakes
Suspensions 16 lines leaf springs with 12 mm x 100 mm
Brake System Two line air brake system acting on all wheels
Brake Chambers 2 Axles with T 30/30 emergency brake chamber,1 axles with T 30 service brake chambers
Electrical system 2x7 pin sockets - 24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear
2 tail & stop combined lamps (red)
2 turn signal combined lamps (orange)
1 license lamp (white)
Tires 13 x 12 R 22.5 (Fulda or Pirelli or Sawa or lassa or starmax Brand)
Rims 13 x 9.00 x 22.5 (Jantsa - Jantsan)
Landing Gear Front: Jack feet are telescopic,parallel working,double speed jointed with wide shoes static 50 tons, dynamic 25 tons capacity (GOS TYPE)
Rear Ramp Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic funsion with cable push – button for remote ramps length 2800 mm width 900 mm,covered all steel and 20x40 mm thickness steel bars.
Floor Middle of platform and on the axles complete chequred sugar plate 6/7 mm steel,edges of the axles are wood and steel ,From the gooseneck end to finishing area edges are 900 mm width,70 mm height hard wood.

Accessories
-2 x 7 bolt type lashing rings
-1 x 60 lt stainless steel water tank
-1 x Wheel chocks and holders
-2 x 8 sides extensions flags 300 mm + 300 mm
-1 x tool box(under the goose neck)
-1 x spare Wheel carrier with 1 tire(on the gooseneck)

Painting Before the painting, surface and accessories are made smooth and then cleaned with a mixture of water and high build epoxy filter is used for first painting. Dyo sadokril akrelik is used for the main painting (3 times )Chassis;Black , Upper structure;Black
Farbe: Schwarz

-5. Wheel Height : 1400 mm
-Loading platform height(Unloaded) : 1350 mm
-Loading platform lenght : 10500 mm included beaver tail
-Total length : 14900 mm
-Total width : 3000 mm +2x8 sides extensions flags 300+300
-Goose neck section length : 4400 mm
-King pin distance from front of goose neck :900 mm for 6x4,and 4x2 trucks
-King pin distance between landing leg: 2500 mm
-King pin type : 2 inch +3.5 inch bolting type OMS Brand
-Length of the rear ramp : 2800 mm
-Width of the rear ramp : 900 mm
-Axles group technical capacity : 48000 Kg
-King pin technical capacity : 20000 Kg
-Gross vehicle weight : 68000 Kg
-Empty weight : 12000 Kg
-Permissible Payload : 56000 Kg
-Technically Payload : 60000 Kg
-Chassis Welding : Arc submerged
-Upper structure : Gas welding
Chassis Heavy duty and extra durability designed I beam; Opting for high tensile steel ST 52.3 A welded by automatic Submerged-Arc chassis;Top Flange 20mm,width 150mm; Middle Flange 10mm,Height 500mm, Botton Flange 20mm,width rs are 200 mm and 160 mm height chassis; 300 mm UPE.
Axles ÖZGÜL Turkish Brand 3 x 16 Ton axles with Mecahnical spring suspensions Upper slung type / Drum brakes
Suspensions 16 lines leaf springs with 12 mm x 100 mm
Brake System Two line air brake system acting on all wheels
Brake Chambers 2 Axles with T 30/30 emergency brake chamber,1 axles with T 30 service brake chambers
Electrical system 2x7 pin sockets - 24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear
2 tail & stop combined lamps (red)
2 turn signal combined lamps (orange)
1 license lamp (white)
Tires 13 x 12 R 22.5 (Fulda or Pirelli or Sawa or lassa or starmax Brand)
Rims 13 x 9.00 x 22.5 (Jantsa - Jantsan)
Landing Gear Front: Jack feet are telescopic,parallel working,double speed jointed with wide shoes static 50 tons, dynamic 25 tons capacity (GOS TYPE)
Rear Ramp Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic funsion with cable push – button for remote ramps length 2800 mm width 900 mm,covered all steel and 20x40 mm thickness steel bars.
Floor Middle of platform and on the axles complete chequred sugar plate 6/7 mm steel,edges of the axles are wood and steel ,From the gooseneck end to finishing area edges are 900 mm width,70 mm height hard wood.

Accessories
-2 x 7 bolt type lashing rings
-1 x 60 lt stainless steel water tank
-1 x Wheel chocks and holders
-2 x 8 sides extensions flags 300 mm + 300 mm
-1 x tool box(under the goose neck)
-1 x spare Wheel carrier with 1 tire(on the gooseneck)

Painting Before the painting, surface and accessories are made smooth and then cleaned with a mixture of water and high build epoxy filter is used for first painting. Dyo sadokril akrelik is used for the main painting (3 times )Chassis;Black , Upper structure;Black
Kleur: Black

-5. Wheel Height : 1400 mm
-Loading platform height(Unloaded) : 1350 mm
-Loading platform lenght : 10500 mm included beaver tail
-Total length : 14900 mm
-Total width : 3000 mm +2x8 sides extensions flags 300+300
-Goose neck section length : 4400 mm
-King pin distance from front of goose neck :900 mm for 6x4,and 4x2 trucks
-King pin distance between landing leg: 2500 mm
-King pin type : 2 inch +3.5 inch bolting type OMS Brand
-Length of the rear ramp : 2800 mm
-Width of the rear ramp : 900 mm
-Axles group technical capacity : 48000 Kg
-King pin technical capacity : 20000 Kg
-Gross vehicle weight : 68000 Kg
-Empty weight : 12000 Kg
-Permissible Payload : 56000 Kg
-Technically Payload : 60000 Kg
-Chassis Welding : Arc submerged
-Upper structure : Gas welding
Chassis Heavy duty and extra durability designed I beam; Opting for high tensile steel ST 52.3 A welded by automatic Submerged-Arc chassis;Top Flange 20mm,width 150mm; Middle Flange 10mm,Height 500mm, Botton Flange 20mm,width rs are 200 mm and 160 mm height chassis; 300 mm UPE.
Axles ÖZGÜL Turkish Brand 3 x 16 Ton axles with Mecahnical spring suspensions Upper slung type / Drum brakes
Suspensions 16 lines leaf springs with 12 mm x 100 mm
Brake System Two line air brake system acting on all wheels
Brake Chambers 2 Axles with T 30/30 emergency brake chamber,1 axles with T 30 service brake chambers
Electrical system 2x7 pin sockets - 24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear
2 tail & stop combined lamps (red)
2 turn signal combined lamps (orange)
1 license lamp (white)
Tires 13 x 12 R 22.5 (Fulda or Pirelli or Sawa or lassa or starmax Brand)
Rims 13 x 9.00 x 22.5 (Jantsa - Jantsan)
Landing Gear Front: Jack feet are telescopic,parallel working,double speed jointed with wide shoes static 50 tons, dynamic 25 tons capacity (GOS TYPE)
Rear Ramp Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic funsion with cable push – button for remote ramps length 2800 mm width 900 mm,covered all steel and 20x40 mm thickness steel bars.
Floor Middle of platform and on the axles complete chequred sugar plate 6/7 mm steel,edges of the axles are wood and steel ,From the gooseneck end to finishing area edges are 900 mm width,70 mm height hard wood.

Accessories
-2 x 7 bolt type lashing rings
-1 x 60 lt stainless steel water tank
-1 x Wheel chocks and holders
-2 x 8 sides extensions flags 300 mm + 300 mm
-1 x tool box(under the goose neck)
-1 x spare Wheel carrier with 1 tire(on the gooseneck)

Painting Before the painting, surface and accessories are made smooth and then cleaned with a mixture of water and high build epoxy filter is used for first painting. Dyo sadokril akrelik is used for the main painting (3 times )Chassis;Black , Upper structure;Black
-5. Wheel Height : 1400 mm
-Loading platform height(Unloaded) : 1350 mm
-Loading platform lenght : 10500 mm included beaver tail
-Total length : 14900 mm
-Total width : 3000 mm +2x8 sides extensions flags 300+300
-Goose neck section length : 4400 mm
-King pin distance from front of goose neck :900 mm for 6x4,and 4x2 trucks
-King pin distance between landing leg: 2500 mm
-King pin type : 2 inch +3.5 inch bolting type OMS Brand
-Length of the rear ramp : 2800 mm
-Width of the rear ramp : 900 mm
-Axles group technical capacity : 48000 Kg
-King pin technical capacity : 20000 Kg
-Gross vehicle weight : 68000 Kg
-Empty weight : 12000 Kg
-Permissible Payload : 56000 Kg
-Technically Payload : 60000 Kg
-Chassis Welding : Arc submerged
-Upper structure : Gas welding
Chassis Heavy duty and extra durability designed I beam; Opting for high tensile steel ST 52.3 A welded by automatic Submerged-Arc chassis;Top Flange 20mm,width 150mm; Middle Flange 10mm,Height 500mm, Botton Flange 20mm,width rs are 200 mm and 160 mm height chassis; 300 mm UPE.
Axles ÖZGÜL Turkish Brand 3 x 16 Ton axles with Mecahnical spring suspensions Upper slung type / Drum brakes
Suspensions 16 lines leaf springs with 12 mm x 100 mm
Brake System Two line air brake system acting on all wheels
Brake Chambers 2 Axles with T 30/30 emergency brake chamber,1 axles with T 30 service brake chambers
Electrical system 2x7 pin sockets - 24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear
2 tail & stop combined lamps (red)
2 turn signal combined lamps (orange)
1 license lamp (white)
Tires 13 x 12 R 22.5 (Fulda or Pirelli or Sawa or lassa or starmax Brand)
Rims 13 x 9.00 x 22.5 (Jantsa - Jantsan)
Landing Gear Front: Jack feet are telescopic,parallel working,double speed jointed with wide shoes static 50 tons, dynamic 25 tons capacity (GOS TYPE)
Rear Ramp Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic funsion with cable push – button for remote ramps length 2800 mm width 900 mm,covered all steel and 20x40 mm thickness steel bars.
Floor Middle of platform and on the axles complete chequred sugar plate 6/7 mm steel,edges of the axles are wood and steel ,From the gooseneck end to finishing area edges are 900 mm width,70 mm height hard wood.

Accessories
-2 x 7 bolt type lashing rings
-1 x 60 lt stainless steel water tank
-1 x Wheel chocks and holders
-2 x 8 sides extensions flags 300 mm + 300 mm
-1 x tool box(under the goose neck)
-1 x spare Wheel carrier with 1 tire(on the gooseneck)

Painting Before the painting, surface and accessories are made smooth and then cleaned with a mixture of water and high build epoxy filter is used for first painting. Dyo sadokril akrelik is used for the main painting (3 times )Chassis;Black , Upper structure;Black
Noticed issues with this ad? Report abuse

Recently viewed

Send a message